![ThinkCleverAndSmart](/img/default-banner.jpg)
- 154
- 3 775 164
ThinkCleverAndSmart
Sweden
Приєднався 12 тра 2013
Lego bowling pinsetter replicas from real pinsetters (brunswick, amf). But also my own build the TCAS pinsetter. Have fun!
I have been working on building a working lego pinsetter since December 2012. I started off with a Brunswick A-2. I tried string pinsetters, Brunswick pinsetters, AMF pinspotters, but nothing worked well. So, I decided to make my own model. The TCAS pinsetter (T-hink C-lever A-nd S-mart). I can mix the existing pinsetter designs and even make my own. This is just the beginning of mini pinsetters made of lego!
I have been working on building a working lego pinsetter since December 2012. I started off with a Brunswick A-2. I tried string pinsetters, Brunswick pinsetters, AMF pinspotters, but nothing worked well. So, I decided to make my own model. The TCAS pinsetter (T-hink C-lever A-nd S-mart). I can mix the existing pinsetter designs and even make my own. This is just the beginning of mini pinsetters made of lego!
Lane, Gutters & Approach - Now 100% LEGO!
I've finally upgraded the Lego bowling alley to actually be 100% lego! The lane, gutters and approach is now completely built out of lego bricks. The ball return now goes under the capping and the ball return rack is placed on the approach where it belongs. I've also started a rework of the pinsetter in preparation for selling instructions, which means a transition from Lego Mindstorms to Lego Control+!
Music: Wintergatan Build Track - Music Box, Harp & Hammered Dulcimer
Music: Wintergatan Build Track - Music Box, Harp & Hammered Dulcimer
Переглядів: 4 439
Відео
Lego Bowling Pinsetter - Finished
Переглядів 25 тис.Рік тому
After 10 years of work, the TCAS pinsetter is finally fully functional! Thank you all for your support throughout the years! Music: JJD - Adventure ua-cam.com/video/PuvMnXu3l7A/v-deo.html
Closeup bowling on a Brunswick A2
Переглядів 8 тис.2 роки тому
I've gotten a bunch of requests of making a video like this, so here it is! Just bowling on a Brunswick A2 Pinsetter, with pinsetter action :)
TCAS Pinsetter - DIY Brunswick Star Shield Tutorial
Переглядів 6 тис.2 роки тому
After getting inspired by Rob over at Garage Bowling Alley, I decided to make my very own Brunswick Star Shield. Just "a little" smaller. Check out Garage Bowling Alley here: ua-cam.com/channels/QvHjZfQdXUEkqgErP0k25A.html Get the pyramid pattern acrylic: e-plast.se/shop/outlet/plexiglas-akryl/plexiglas-textures-3-0-mm-pyramid-blank-750x500 Thanks to Rikard Holmqvist for the video of the fluore...
TCAS Lego Pinsetter Final Rebuild - Episode 3
Переглядів 8 тис.2 роки тому
This is the third episode in a series where the TCAS Pinsetter is modified to become as reliable as needed for me to say it's finished. After this series is completed, the only thing left to do is to reveal the distributor to you all. Music: "Emerson" by Wintergatan This track can be downloaded for free at www.wintergatan.net Free license to use this track in your video can be downloaded at www...
TCAS Lego Pinsetter Final Rebuild - Episode 2
Переглядів 4,5 тис.2 роки тому
This is the second episode in a series where the TCAS Pinsetter is modified to become as reliable as needed for me to say it's finished. After this series is completed, the only thing left to do is to reveal the distributor to you all. Music: "Valentine" by Wintergatan This track can be downloaded for free at www.wintergatan.net Free license to use this track in your video can be downloaded at ...
TCAS Lego Pinsetter Final Rebuild - Episode 1
Переглядів 6 тис.2 роки тому
This is the first episode in a series where the TCAS Pinsetter is modified to become as reliable as needed for me to say it's finished. After this series is completed, the only thing left to do is to reveal the distributor to you all. Music: "Music Machine Mondays Theme Song" by Wintergatan This track can be downloaded for free at www.wintergatan.net Free license to use this track in your video...
TCAS - 2021 Recap
Переглядів 1,7 тис.2 роки тому
Another year in the books! Let's take a look at all the videos we saw here this year! Music in this video: TheFatRat - Monody Avenger - Karl Casey @ White Bat Audio Claim of Thrones - RKVC Happy by MBB soundcloud.com/mbbofficial Creative Commons - Attribution-ShareAlike 3.0 Unported - CC BY-SA 3.0 creativecommons.org/licenses/b... Music promoted by Audio Library ua-cam.com/video/g6swHZbWtRc/v-d...
Lego Technic RC Volkswagen Beetle + Instructions!
Переглядів 1,3 тис.2 роки тому
A fully remote controlled Volkswagen Beetle, including details such as a spinning engine, openable doors, trunk, and bonnet, and even windshield wipers! Instructions: www.thinkcleverandsmart.com/instructions Music: Marxist Arrow av Twin Musicom licensieras enligt licensen Creative Commons Attribution 4.0. creativecommons.org/licenses/by/4.0/ Artist: www.twinmusicom.org/
TCAS Lego Pinsetter - Making a new side wall in my dream Lego home!
Переглядів 2,5 тис.2 роки тому
I recently moved in to a new apartment, fulfilling my dream of a Lego room and enough space for years to come. In this first video filmed there, I set out to create a new side wall for the Pinsetter to mark the start of this new era! Music: "Moon and Star" by Wintergatan This track can be downloaded for free at www.wintergatan.net Free license to use this track in your video can be downloaded a...
TCAS Lego Pinsetter - Distributor Progress
Переглядів 3,6 тис.2 роки тому
It's time to reveal my secrets since 2017. I've now decided on a design that will end up working, and so I can now show all the designs that has led up to this moment. Sadly some of these doesn't have any video, and some barely have pictures. This is because I knew I wasn't going to publish anything as long as they didn't work, which meant that I didn't have to take photos or videos of it. This...
Lego Retro AM/FM Radio With Working Buttons and Controls +Instructions
Переглядів 2,7 тис.2 роки тому
Instructions are available here: www.thinkcleverandsmart.com/instructions A lego replica of an ASA SANKEI TCR-700 AM/FM radio and cassette player. Buttons and knobs are working and you can load the radio with a Lego cassette band. Built for the Lego Event held in Bureå, Sweden, at 2021-07-31. By Joakim Jidbacken Follow me on Instagram: @tcasbuilds
TCAS Lego Pinsetter - PV Productions Battery Box
Переглядів 2,9 тис.3 роки тому
One of the longest running problems I've had with the pinsetter has been dying batteries. I'm always running low and it prevents me from working as much as I'd want on the machine. After a lot of searching, I finally found a solution! PV-Productions has a battery box that replaces the standard Double A batteries for the Mindstorms robots. I got two, to power the pinsetter indefinitely! Links: P...
Working Ball Return - Explained
Переглядів 18 тис.3 роки тому
Last weeks video saw the introduction of the fully functional lego bowling ball return, and this time we deep-dive into the process of creating it, and how it works! Instructions can be found here: www.thinkcleverandsmart.com/instructions Follow me on Instagram: @tcasbuilds
Fully Functional Lego Bowling Ball Return
Переглядів 7 тис.3 роки тому
After 9 years, I have finally managed to create a fully functional ball return out of lego! It uses the motor that also drives the transport band to keep the noise down. Watch it work in this ad-like introduction video! Instructions for static model: www.thinkcleverandsmart.com/instructions Music: Avenger - Karl Casey @ White Bat Audio
TCAS Lego Pinsetter - Still not complete?
Переглядів 6 тис.3 роки тому
TCAS Lego Pinsetter - Still not complete?
TCAS Lego Pinsetter - New gripping plate!
Переглядів 8 тис.3 роки тому
TCAS Lego Pinsetter - New gripping plate!
I attended Lego Masters Sweden (recap)
Переглядів 1,6 тис.3 роки тому
I attended Lego Masters Sweden (recap)
Make Your Own Lego Instructions Tutorial (stud.io)
Переглядів 30 тис.3 роки тому
Make Your Own Lego Instructions Tutorial (stud.io)
TCAS Lego Pinsetter - New Triggering
Переглядів 4,6 тис.3 роки тому
TCAS Lego Pinsetter - New Triggering
TCAS Lego Pinsetter - Pin Deck Lighting
Переглядів 6 тис.4 роки тому
TCAS Lego Pinsetter - Pin Deck Lighting
TCAS Lego Pinsetter - New stand from IKEA
Переглядів 3,2 тис.4 роки тому
TCAS Lego Pinsetter - New stand from IKEA
TCAS Lego Pinsetter - New Sweep Drive
Переглядів 10 тис.5 років тому
TCAS Lego Pinsetter - New Sweep Drive
I wonder if the ja ru mini bowling pins would work in this pinsetter?
I think their heads are too small to be able to be picked up sadly
@@ThinkCleverAndSmart I'm sure you could adjust the setting table
Its not the same when i downloaded it please help
What is it that differs from the version you downloaded?
I need help. How can I put files into the app?
Hi, please use the updated video (showing studio) instead :)
If you make an instruction manual for this I would buy it… it looks VERY well made.
i bought a mini bowling set that came with 1 inch bouncy balls, the bouncy balls dont hook any and they bounce too much, what do you suggest?
I think there should be 1 inch marbles available at the toy store, either made of glass of metal. I’d recommend those :)
@@ThinkCleverAndSmart ive been thinking i should get those, thanks.
Hi man i whant to build the tape deck part. When i build a boom box radio do you. Have instruction s at all for the tape deck part .of the build 😊
Hi! I sell the instructions for the entire radio on my website (thinkcleverandsmart.com). They cost about $11
I love the look of it the tape deck part 👌💥
Thank you!
I have a new pinseter
Can u send me a link on what i need and a instruction manual on how to build this
Hi! I don’t have any instructions yet but that is coming in the future :)
@ThinkCleverAndSmart okay thanks let me know when you get instructions
@@danielbatista4242 It depends on when I can finish it completely :)
This video helped me get my creations on to Rebrickable. Thank you dearly for this very succinct yet hyper informative guide!
Thank you so much for sharing this! It warms my heart ❤️
Any more videos?
Thank you!
It's a shame they covered up those nice "A2" logos on the deck shields with those not so nice "cosmic" decals.
😂❤😂❤
Cool
Brur is Se logo pins 😞💀💀💀💀😊
So ur family also does bowling? Mine does too.
May you please do a video of how you built the pinch setter from lego
This is the real pinsetter
How do you do this effect it brings nostalgia
will you ever have something so that we can build are own lego pinsetter?
Yes :)
now make 2 side by side
Make it an official Lego set!
This is incredible! I wish there could be instructions so i could build one, but that is probably not feasible.
One day 😄
your videos Sparked up my imagination with lego!
Damn, this is really cool man. keep it up!
Amazing build!
GSX
I want part 2!
You should really partner with Lego and have this be an official set. I would totally buy this!
Cool! When u gonna do more vids? Like ur content!
Is it possible to change the color of already completed steps? If so, how to do it?
Hi! Could you explain further how you mean? What do you mean by completed step?
I know it would be an insane amount of Lego, but will it be possible to dupiclate it a second time and connect them to become an entire pair of lanes? So that they use the same ball return etc? Just wondering as it would be cool to have an entire pair of working pinsetters/lane
Yes, it’s designed to work that way :)
This thing is fckin gay. I hate this bricklink shit. It took me 50 minutes built a frickin 1/2 of solid axle of my pick up truck. Its not damn welcome for fans' creations. How the heck People use ANY software to build A LEGO model????????? Do you like felling pain or smth?
skill issue
@@davineasley life issue
Music intro?
It’s from an old Brunswick intro they used for the A2 training series
ok @@ThinkCleverAndSmart
the last minute and a half is more useful than every other Lego designer tutorial out there combined.
Nice work!
Thanks!
Its good but HOW DO I DO IT FOR MORE THAN 4000 PEICES
Use my new tutorial for studio instead. It can handle way more pieces :)
Instructions?
Hi! I do have instructions for the new version of this, on my website. thinkcleverandsmart.com/instructions
Can you show the pin sweep?
There’s a video of that here on my channel :)
Can you show me your pin sweep?
Where did you get or buy the pins
I got them from my local bowling alley. They were kind enough to give them to me :)
Hey tcas I've been a fan for awhile And I have some ideas for scoremore
Hi, nice! What ideas do you have?
@@ThinkCleverAndSmart 1. Animation wise. I think instead of having only animations for strikes spares misses and splits you should add the option for people to add animations for 1-9 pins 2. Have the option of Removing the scoremore logo or replacing it with the bowling alleys name or logo (in the program only) or having the option to move it into a corner or smth 3. Scoreboard themes (maybe) Like we can have the option to make the scoreboard look like a older scoring system or like themes for it (example: Christmas theme) 4. Being able to put a custom screen saver That's all the ideas that I would like to see Scoremore is so useful btw :p
@@CinnabonLeafeon alright! Custom 1-9 pin animations are coming in the future. There won’t be an option to remove the ScoreMore logo (since it has to be visible what scoring system it is since it’s free), but moving it to the side has been tested. We will see. Scorecard themes are also coming, starting with a small redesign in the next version for those who have donated money to the project :)
@@ThinkCleverAndSmart Omg thank you sm for considering ^w^ I'ma donate after Christmas :3
@@ThinkCleverAndSmart oh shoot I also forgot to add Also make it to where we can add animations for doubles, turkeys, 4 baggers and so on.
How to build would love to do this for my son or do u build and sale them
how did it take you to build the logo pinsetter
you did a great job on the logo pinsetter
Можете скинуть инструкцыю
You need a 3D model before you watch this video.
You can also build anything you want, so no need for a separate model :)
is there an option for more than four bowlers
In a few weeks time there will be a paid option for up to 6 bowlers yes :)
@@ThinkCleverAndSmart - any idea of the cost
@@riversarcadereview385 Its not decided but it will be around $25
@@ThinkCleverAndSmart - not bad...also will there ever be a '3-ball' option
@@riversarcadereview385 Yes, whenever there’s enough demand for a feature, then I will implement it 😄
this is so f-ing cool